Data Sheet

TeledyneLeCroyCorporation CascadingwithCATCSYNCExpansionCard
144 USBProtocolSuiteUserManual
Toremoveanexpansioncard,followthesesteps:
1. UnplugthesystemfromACpowerandturnthesystemsotheexpansionportis
facingyou.Notethetworetainingscrewsandtheholesfortheextractiontoolthat
arelocatedonthepaneloftheexpansioncard.
Note:Theexampleshowsadifferentexpansioncard,buttheremovalmethodisthesame.
2. Inserttheextraction‐toolprongsintotheholesintheexpansion cardpanel.
Note:Iftheprongsdonotslipeasilyintotheholes,useasmallnailfileorsimilardevicetoremove
paintfromtheprongs.
3. Rotatetheextractiontooltoahorizontalpositiontolocktheprongsintoplaceand
makeahandle.