Data Sheet

TeledyneLeCroyCorporation ViewRawBits(2.0)
330 USBProtocolSuiteUserManual
Figure 6.25: Time Stamp Dialog
Youcan:
 PlacetheZeroTimeStampatthispacket
 ShowtherecordedTime Stamp
 PlacetheZeroTimeStampatthefirstpacket
 PlacetheZero TimeStampatthetriggerpacket.
Note:YoucannotplacetheZeroTimeStampatapacketwhenintheCalendar.
YoucanalsogototheTimeAfterinseconds,ortheTimeBeforeinseconds.
Note:Timestampsarecorrectedtomatchourmoreaccurate2.5ppmclock.Aftertheerrordueto
calculatingvia2 nsnominaltimingofsymbolsreaches8 nsec,thesystemwillcorrectthenext
timestampbyusingthevalueobtainedfromthe2.5ppmtimestampclock.Thiscanresultin
“jumps”eitherforwardorbackwardbythisamountoftimeincaptures,andmayresultin
“blank”locationsintheLinkTrackerview.Theseshouldnotbeconstruedasmistakesinthe
traffic,butasamodificationnecessaryforustoprovidethemostaccuratetimestampsoverthe
rangeofatrace.
YoucanalsocreateanewmarkerbyselectingSetmarker.
6.5 View Raw Bits (2.0)
Youcanexpandaspecificpackettoviewtherawbitsindetail.
Toviewrawbits:
1. Right‐clickPacket#forthepackettoview,todisplaythePacketmenu: