Data Sheet

USBProtocolSuiteUserManual 69
VoyagerM310PAnalyzer TeledyneLeCroyCorporation
Switches
Recording Memory Size
8GBor16GBfortrafficdatacapture,timing,stateandotherdata.
2.1.5 Voyager M310P Specific Setup Notes
TheType‐CconnectorsonthefrontaremeanttoconnecttoHosts(whichhaveaDFPor
DownstreamFacingPort)andDevices(whichhaveaUFPorUpstreamFacingPort)as
indicatedintheFigure 2.6below.Notethatitwillworkwiththe“otherway"(Hoston
Left,DeviceonRight),butitispreferredtoconnectasindicatedsothatthedefaultsetup
issimilartoourprevious10USBAnalyzers,whichusedan"A"connectoronleftanda"B"
connectorontheright.Thismakesthetraceseasiertounderstandandsupportbyour
SupportTeam,andreducesthenumberofsetupdiagramstofollow.Ofcourse,thedata
rolescanswapviaUSBProtocol,andourtraceswilltrackthat.So,youcanfollowour
suggestionornot,anditwillstillwork.
Figure 2.3: Voyager M310P Preferred Connection Method
WARNING: CableOrientation:Theuseoftwo(2)ElectronicallyMarkedcablesisnotpermitted.
Power On/off
Programmableload
forPowerDelivery
RightConnector:
Typically,theHostis
connectedherewhen
inAnalyzerMode
LeftConnector:
Typically,theDeviceis
connectedherewhen
inAnalyzerMode
ExerciserConnector:
UsethisforExerciser
scenariosorifrunning
USBCompliance.