Data Sheet

TeledyneLeCroyCorporation GeneralRecordingOptions
244 USBProtocolSuiteUserManual
5.2 General Recording Options
TheGeneralRecordingOptionsallowyoutoselectoradjustthetriggermode,thebuffer
size,theamountofpost‐triggerrecording,andthetracefilenameandpath.
5.2.1 Product
Youcanselectoneofthefollowingproducts:
 VoyagerM310C
 VoyagerM3/M3i
 VoyagerM3x
 VoyagerM310
 AdvisorT3
 MercuryT2
 MercuryT2C
 USBTracer/Trainer*
 USBAdvisor*
 USBMobileHSandUSBMobileT2*
*Theseanalyzersarenolongerformallysupportedandtestedbeginninginrelease4.90,
althoughnothingwasdonetopreventthemfromstillworking.See“USBTracer/
Trainer,USBAdvisor,USBMobileHSandUSBMobileT2”onpage 102formore
information.
5.2.2 Trigger Mode
TheTriggerModeboxpresentsthreeoptionsthatallowyoutosethowtheAnalyzer
beginsandendsarecording.
Figure 5.33: Trigger Mode Dialog
Theoptionsare:Snapshot,ManualTrigger,andEventTrigger.
Snapshot
ASnapshotisafixed‐lengthrecording.Thesizeofthisrecordingissetby
theBufferSizebox.Recordingbeginswhen isclickedandends
wheneithertheselectedbuffersizeisfilledorthe buttonispressed.