Data Sheet

USBProtocolSuiteUserManual 87
AdvisorT3 TeledyneLeCroyCorporation
needstobe>800mVtoseealogic"1",Signalneedsto
be<400mVtoseealogic"0".Maximumvalueofthe
externalinputsignalwhichcanbeinputis5V.
Minimumvalueis0V.
TriggerOut
Bayonetconnectorexternaltriggeroutput.
PulseWidth=280ns.PulseVoltage=3.3Voltsinto1
MegOhms.PulseVoltage=2.7Voltsinto50Ohms.
Pulseispositivegoing.
Figure 2.13: Micro DB-25 "Octopus" Interface Cable
PowerConnector 12V,3ADC
PowerSwitch (0/1)
WARNING: Donotopentheenclosure.Nooperatorserviceablepartsareinside.Refer
servicingtoTeledyneLeCroycustomercare.
2.5.4 Specifications
TheAnalyzerhasthefollowingspecifications.
Power Requirements
12VDC,3Amps