Datasheet

6
SPECIFICATIONS
WaveStation 2012 WaveStation 2022 WaveStation 2052
Channel Characteristics
Output Connector BNC
Output Impedance 50 Ω, High Impedance
External Clock
Input Connector BNC
Frequency Range 10 MHz ± 10 0Hz
Min Input Voltage Swing Input voltage swing range: 3.3 Vpp - 5.5 Vpp
Sync Output
Voltage Level TTL compatible
Pulse Width > 50 ns, not adjustable
Output Impedance 50 Ω (typical)
Maximum Frequency 2 MHz
Trigger Output
Voltage Level TTL compatible
Pulse Width > 400 ns
Output Impedance 50 Ω (typical)
Maximum Frequency 1 MHz
Output Connector Through Rear Panel
Ext Trig / Gate / FSK / Burst
External Trigger
Trigger Input Level TTL compatible
Trigger Slope Up or down (optional)
Trigger Pulse Width > 100 ns
Trigger Input Impedance > 5 kΩ, DC coupling
External Modulation ±6 V = 100% modulation > 5 kΩ input impedance
External Trigger TTL compatible
Max. Voltage Input Note: The external input voltage can't be over ±6 V, otherwise instrument gets damaged
Assignable to Both Channels 1 or 2,
1 AND 2
Ext Trig in: Assignment Channel 1, Channel 2 or Both
Ext Trig out: Assignment Channel 1 or Channel 2
Max Frequency Ext Trig in: 1 MHz
Ext Trig out: 1 MHz
Input Latency < 300 ns
Polarity Selectable No
General Characteristics
Standard Interface USB Host, USB Device and GPIB (IEEE 488)
Front Panel Connectors Output BNC and USB host
Rear Panel Connectors BNC and USB device
State on Power On/Off Selectable factory default / last state
Accuracy Within 90 days ± 50 ppm within 1 year ±100 ppm 18° C ~ 28° C
Temperature Coefficient < 5 ppm / °C