Datasheet

BASICS

WaveSurfer 3000 Getting Started Guide

Serial Trigger and Decode Options

Serial trigger and decode options provide added insight when

debugging serial data standards (see table below). For the most up-to-

date list, go to: teledynelecroy.com/serialdata.

To access serial trigger and decode functions, press the front panel

Decode button or choose Analysis > Serial Decode from the menu bar.

Serial trigger and decoder setup differs depending on the protocol. For

detailed instructions, see the Trigger and Decode Instruction Manual

linked to each serial data standard on our website.

Software Options

Software options are available to enhance the operation of a WaveSurfer

3000 oscilloscope. After activating your license key (see p.14), these

functions are added to the oscilloscope’s menu bar.

Multi-Instrument Options

The Mixed Signal option (WS3K-MSO) enables mixed analog and digital

input and triggering. The digital leadset is delivered with the purchase of

this option. See p.13 and p.25.

The WaveSource Waveform Generator option (WS3K-FG) provides

stimulus output of Sine, Square, Ramp, Pulse, DC, Noise, and Arbitrary

waveforms. See p.33.

The Digital Voltmeter option (WS3K-DVM) activates an integrated 4-digit

digital voltmeter and 5-digit frequency counter that operates through the

same probes already attached to the oscilloscope channels. View real-

time and statistical (Min, Max, Avg, Range) measurements through a

dedicated user interface display that continues even when your triggering

system is stopped. The WS3K-DVM license key can be downloaded from

teledynelecroy.com/redeem/dvm at no charge.

Part Number Description

WS3K-AUTO TD CAN Std. and LIN Trigger and Decoder

WS3K-EMB TD I

C, SPI, UART/RS-232 Trigger and Decoder

WS3K-CAN FDbus TD CAN Std. and CAN FD Trigger and Decoder

WS3K-FlexRaybus TD FlexRay Trigger and Decoder