Manual

P ART T WO : COMMANDS
114 ISSUED: February 2005 WM-RCM-E Rev D
CURSOR
CURSOR
_
MEASURE, CRMS
Command/Query
DESCRIPTION
The CURSOR_MEASURE command specifies the type of cursor or
parameter measurement to be displayed, and is the main command
for displaying parameters and Pass/Fail.
The modes PARAM, SHOW DASH, and LIST used in some earlier
LeCroy instruments are not available in X-Stream instruments.
The CURSOR_MEASURE? query indicates which cursors or
parameter measurements are currently displayed.
N OTATION
CUST [,STAT]
custom parameters
FAIL
Pass/Fail: fail
HABS
horizontal absolute cursors
HPAR [,STAT]
standard time parameters
HREL [,ABS,DELTA,SLOPE]
horizontal relative cursors
OFF
cursors and parameters off
PASS
Pass/Fail: pass
VABS
vertical absolute cursors
VPAR [,STAT]
standard voltage parameters
VREL [,ABS,DELTA]
vertical relative cursors
COMMAND SYNTAX
CuRsor_MeaSure <mode>[,<submode>]
<mode> : = {CUST, FAIL, HABS, HPAR, HREL, OFF, PASS,
VABS, VPAR, VREL}
<submode> : = {STAT, ABS,DELTA,SLOPE}