Manual

Remote Control Commands and Queries
WM-RCM-E Rev D ISSUED: February 2005 131
VALUES FOR RESCALE
FUNCTION: <addend> : = 0.0 to 1e15
<multiplier> : = 0.0 to 1e15
<units> : = {UNCHANGED, A, CEL, C, HZ, K, N, OHM, PAL, V, W, DB,
DEG, PCT, RAD, S}
R ESCALE P HYSICAL U NITS V ALUE N OTATION
UNCHANGED
T
he unit remains unchanged.
PAL
Pascal
A
Amperes
V
Volt
CEL
Celsius
W
Watt
C
Coulomb
DB
decibel
HZ
Hertz
DEG
degree
K
Kelvin
PCT
percent
N
Newton
RAD
radian
OHM
Ohm
S
second
AVAILABILITY <sourceN> : = {C3, C4} only on four-channel oscilloscopes.
<extended_source> : = {C3, C4} only on four-channel oscilloscopes
EXAMPLES (GPIB)
The following instruction defines Trace F1 to compute the summed
average of Channel 1 over 200 sweeps:
CMD$="F1:DEF
EQN,‘AVG(C1)’,AVGTYPE,SUMMED,SWEEPS,200":
CALL IBWRT(SCOPE%,CMD$)
CALL IBWRT(SCOPE%,CMD$)
The following instruction defines Trace F1 to compute the product of
Channel 1 and Channel 2:
CMD$=“F1:DEF EQN,‘C1*C2’”:
CALL IBWRT(SCOPE%,CMD$)