Manual

Remote Control Commands and Queries
WM-RCM-E Rev D ISSUED: February 2005 197
EXAMPLE (GPIB) A The following instruction reads the average values for all the
columns individually:
CMD$ = “PAST? CUST, AVG”
CALL IBWRT (SCOPE%,CMD$)
CALL IBRD(SCOPE%,RD$)
EXAMPLE (GPIB) B The following instruction reads all the statistical values for
parameter P2:
CMD$ = “PAST? CUST, P2”
CALL IBWRT (SCOPE%,CMD$)
CALL IBRD(SCOPE%,RD$)
RESPONSE FORMAT A
PAST CUST,AVG,290.718E-3 V,389.25E-12 V.S,-
144.589E-3 V,93.76604E-9 S,290.725E-3
V,389.25E-12 V.S,-144.589E-3 V,229E-9 V
RESPONSE FORMAT B
PAST CUST,P1,AMPL,C1,AVG,290.718E-3
V,HIGH,297.5E-3 V,LAST,294.2E-3
V,LOW,278.2E-3 V,SIGMA,3.047E-3 V,SWEEPS,182