Manual

P ART T WO : COMMANDS
204 ISSUED: February 2005 WM-RCM-E Rev D
MISCELLANEOUS
PASS_FAIL, PF
Command/Query
DESCRIPTION The PASS_FAIL command sets up the pass/fail system.
COMMAND SYNTAX
PASS_FAIL <state>[,<logic>[,<stop after>]]
<state>:={ON,OFF}
<logic>:={AllTrue,AllFalse,AnyTrue,AnyFalse,
AllQ1ToQ4OrQ5ToQ8,AnyQ1ToQ4AndAnyQ5ToQ8}
<stop after>:={1 to 1,000,000,000 sweeps}
QUERY SYNTAX
PASS_FAIL? or PF?
EXAMPLE (GPIB) The following instruction sets the pass/fail system to all false, and
to stop after 20 acquisitions:
CMD$=”PF ON,ALLFALSE,20”: CALL
IBWRT(SCOPE%,CMD$)
RELATED COMMANDS
CRMS