Manual

Remote Control Commands and Queries
WM-RCM-E Rev D ISSUED: February 2005 243
EXAMPLE (GPIB) The following instruction configures the logic state of the pattern as
HLXH (CH 1 = H, CH 2 = L, CH 3 = X, CH 4 = H) and defines the
state as NOR.
CMD$=“TRPA C1,H,C2,L,C4,H,STATE,NOR”:
CALL IBWRT(SCOPE%,CMD$)
RELATED COMMANDS
TRIG_COUPLING, TRIG_DELAY, TRIG_LEVEL,
TRIG_MODE, TRIG_SELECT, TRIG_SLOPE