Manual

P ART T WO : COMMANDS
84 ISSUED: February 2005 WM-RCM-E Rev D
S HORT
F ORM
L ONG F ORM S UBSYSTEM
( CATEGORY )
W HAT THE C OMMAND OR Q UERY
D OES
DTJN DOT_JOIN
DISPLAY Controls the interpolation lines between data points.
MAIL EMAIL
MISCELLANEOUS Sets up email protocol and addresses.
*ESE *ESE
STATUS
Sets the Standard Event Status Enable register
(ESE).
*ESR? *ESR?
STATUS Reads, clears the Event Status Register (ESR).
EXR? EXR?
STATUS Reads, clears the EXecution error Register (EXR).
FCR FIND_CENTER_RANGE
FUNCTION
Automatically sets the center and width of a
histogram.
FRTR FORCE_TRIGGER
ACQUISITION Forces the instrument to make one acquisition.
FRST FUNCTION_RESET
FUNCTION Resets a waveform-processing function.
GRID GRID
DISPLAY Specifies single-, dual- or quad-mode grid display.
HCSU HARDCOPY_SETUP
HARD COPY Configures the hard-copy driver.
HMAG HOR_MAGNIFY
DISPLAY Horizontally expands the selected expansion trace.
HPOS HOR_POSITION
DISPLAY Horizontally positions intensified zone’s center.
*IDN? *IDN?
MISCELLANEOUS For identification purposes.
INE INE
STATUS Sets the INternal state change Enable register (INE).
INR? INR?
STATUS Reads, clears INternal state change Register (INR).
INSP? INSPECT?
WAVEFORM
TRANSFER
Allows acquired waveform parts to be read.
ILVD INTERLEAVED
ACQUISITION
Enables/disables Random Interleaved Sampling
(RIS).
INTS INTENSITY
DISPLAY Controls the brightness of the grid.
IST? IST?
STATUS Reads the current state of the IEEE 488.
MSG MESSAGE
DISPLAY Displays a character string on the instrument screen.
MSIZ MEMORY_SIZE
ACQUISITION Selects max. memory length.
MTAT MT_ATTENUATION
ET-PMT
Sets cable attenuation factor for 2M_TP,
2M_COAX, 8M, 34M, 139M, 156M.
MTFA MT_FAIL_ACTION
ET-PMT Sets fail actions.
MTOF MT_OFFSET
ET-PMT Sets the offset for STM-1E, STS-3E, and 139M.
MTOP? MT_OPC?
ET-PMT Returns state of last operation.
MTPC? MT_PF_COUNTERS?
ET-PMT Returns pass/fail result.
MTST MT_SELECT_TEST
ET-PMT Selects Electrical Telecomm testing standard.
MTSY? MT_SYMBOL?
ET-PMT Returns 1 or 0 symbol, or pos or neg.
MTVA MT_VERTICAL_ALIGN
ET-PMT
Performs offset alignment for STM-1E, STS-3E, and
139M.
OFST OFFSET
ACQUISITION Allows output channel vertical offset adjustment.
OFCT OFFSET_CONSTANT
CURSOR Sets offset to be fixed in either divisions or volts.
*OPC *OPC
STATUS Sets the OPC bit in the Event Status Register (ESR).
*OPT? *OPT?
MISCELLANEOUS Identifies oscilloscope options.
PNSU PANEL_SETUP
SAVE/RECALL Complements the *SAV/*RST commands.
PARM PARAMETER
CURSOR Controls the parameter mode.