Datasheet

27
HIGH VOLTAGE DIFFERENTIAL PROBES
ADP30X high-voltage active probes are safe, easy-to-use, and
ideally suited for measuring power electronics. The ADP300
is designed for troubleshooting low-frequency power devices
and other circuits where the reference potential is elevated
from the ground or the location of the ground is unknown.
The ADP305 is designed for measuring the high-speed
floating voltages found in today’s power electronics.
Features
•
20 MHz and 100 MHz bandwidth
•
1,000 V
rms
common mode voltage
•
1,400 V
peak
differential voltage
ADP30X Specications
Electrical Characteristics
Bandwidth 20 MHz (ADP300)
100 MHz (ADP305)
Differential Voltage 1,400 V peak
Common Mode Voltage 1,000 V rms CAT III
Low-Frequency Accuracy (Probe Only) 1% of Reading
CMRR 50/60 Hz 80 dB (10,000:1)
100 kHz 50 dB (300:1)
Max. Slew Rate (Referenced to Input) 60,000 V/µs (ADP300)
300,000 V/µs (ADP305)
AC Noise (Referenced to Input) 50 mV rms
Attenuation ÷100/÷1000 (automatically selected by scope)
Input Impedance Between inputs 8 MΩ, 6 pF
Each input to ground 4 MΩ, 1 pF
Sensitivity 1 V/div to 350 V/div (ADP300)
200 mV/div to 350 V/div (ADP305)
Interface ProBus, 1 MΩ*
General Characteristics
Overall Length 2 m
Input Connectors 4 mm Shrouded Banana Plug
Operating Temperature 0 ˚C to 50 ˚C
Warranty 1 year
*Requires AP-1M for oscilloscopes with 50 Ω only inputs
•
EN 61010 CAT III
•
80 dB CMRR at 50/60 Hz
•
ProBus system
•
Full remote control