Datasheet

39
OPTICAL PROBES
Teledyne LeCroy’s wide-band multi-mode optical-to-electrical converters
are designed for measuring optical communications signals. Their broad
wavelength range and multi-mode input optics make these devices ideal for
applications including Ethernet, Fibre Channel, and ITU telecom standards.
Available to support optical data rates up to 11.3 Gb/s with reference
receivers, or slightly higher without reference receivers.
These wide- band multi-mode optical-to-electrical converters are designed
for measuring optical communications signals. They connect to Teledyne
LeCroy real-time oscilloscopes and provide capability for physical layer
signal assessment using a variety of oscilloscope tools, such as SDAIII-
CompleteLinQ Serial Data Eye, Jitter, Noise and Crosstalk Analysis, mask
testing, serial triggering and decoding, and other compliance and debug
tools. Maximum data rate test capability is >11.317 Gb/s with reference
receiver, or 12.5 Gb/s without.
Opposite page:
OE455 Optical Probe working with a WaveRunner 640 Zi oscilloscope.
Teledyne LeCroy
Optical Probe
Model Numbers:
OE695G
OE425
OE455
OE525
OE555