Datasheet

41
OPTICAL PROBES
Ordering Information
Product Description Product Code
Optical-to-Electrical Converter, 785 to 1550 nm, 2.92 mm connector with ProLink adapter OE695G
Optical-to-Electrical Converter, 500–870 nm ProBus BNC Connector OE425
Optical-to-Electrical Converter, 950–1630 nm ProBus BNC Connector OE455
Optical-to-Electrical Converter, 500–870 nm ProLink BMA Connector OE525
Optical-to-Electrical Converter, 950–1630 nm ProLink BMA Connector OE555
OE425/OE455/OE525/OE555
The O/E converters contain calibration data that can be used to create optical
reference receivers for SONET/SDH (up to OC48/STM16), Fibre Channel, Gigabit
Ethernet, and other optical standards. This feature is available when the O/E is
used on a supported oscilloscope. The universal reference receiver supports any
data rate up to 3 GHz and remains calibrated on any channel of the oscilloscope.
Features
•
Frequency range to 5 GHz (6 GHz optical)
•
62.5 µm or narrower multi-mode or single-mode
fiber input
•
Broad wavelength range:
– 500–870 nm (OE425, OE525)
– 950–1630 nm (OE455, OE555)
•
High responsivity
•
Low noise
•
Included Accessories:
Multi-mode optical ber jumper FC-FC
FC to ST adapter
FC to SC adapter
Specications
OE425/OE525 OE455/OE555
Wavelength Range 500 – 870 nm
460 – 870 nm
(0.1 V/mW)
950
– 1630 nm
800 – 1630 nm
(0.1 V/mW)
Conversion Gain 0.5 V/mW 1.1 V/mW
Bandwidth 5 GHz
(6 GHz optical)
3.
5 GHz
(4.5 GHz optical)
Equivalent Noise 2.2 µW rms 1.0 µW rms
Maximum Optical Power
(at 5% Saturation)
2.
2 mW 1.0 mW
Rise
Time 90 ps 108 ps
Maximum Safe Input 5.5 mW 2.5 mW
Temperature Drift 0.00275 dB / °C 0.00275 dB / °C
Frequency Response Ripple 1.1 dB 1.1 dB
Connector Type FC/PC FC/PC