Manual

vi
Model 3010PAC
Teledyne Analytical Instruments
Model and Part Number Designations
The part numbers are the most specific identification. When using this
manual for operation, maintenance, or ordering parts, check the part numbers
on your Instruments to be sure of a match. Where an underscore (_) appears in
a model number, the unit has more than one application. For example,
3010P_C means that the same unit is part of the 3010PAC and the 3010PBC
models.
3010TA: NEC Type Trace Oxygen Analyzer with flush mount Control
Unit. Consists of 3010TA Control Unit, PN D-64596A and a
3010T Analysis Unit, PN D-65478.
3010PA: NEC Type Percent Oxygen Analyzer with flush mount
Control Unit. Consists of 3010PA Control Unit, PN
D-64596B or C and a 3010P Analysis Unit, PN D-65479.
3010TB: NEC type Trace Oxygen Analyzer with bulkhead mount
Control Unit. Consists of 3010TB/PB Control Unit, PN
D-66190A, and a 3010T Analysis Unit, PN D-65478.
3010PB: NEC type Percent Oxygen Analyzer with bulkhead mount
Control Unit. Consists of 3010TB Control Unit, PN D-66190
B or C, and a 3010T Analysis Unit, PN D-65479.
3010TAC: CENELEC type Trace Oxygen Analyzer with flush mount
Control Unit. Consists of 3010TA Control Unit, PN
D-66192A, and a 3010T_C Analysis Unit, PN C-66336
3010PAC: CENELEC type Percent Oxygen Analyzer with flush mount
Control Unit. Consists of 3010PA Control Unit, PN D-66192
B or C, and a 3010P_C Analysis Unit, PN B-39923C
3010TBC: CENELEC type Trace Oxygen Analyzer with bulkhead
mount Control Unit. Consists of 3010TB Control Unit, PN
D-66194A, and a 3010T_C Analysis Unit, PN C-66336
3010PBC: CENELEC type Percent Oxygen Analyzer with bulkhead
mount Control Unit. Consists of 3010PB Control Unit, PN
D-66194 B or C, and a 3010P_C Analysis Unit, PN
B-39923C
Options: See Specific Model Information sheet, on page iv for details.