Manual

A–1
Appendix
Teledyne Analytical Instruments
A Business Unit of Teledyne Electronic Technologies
Appendix
Specifications
Accuracy: ±2% full scale or better
Reproducibility: ±1% full scale or better
Noise: Less than ±1%
Drift: Less than 1% per day
Diurnal: Less than 1% per day
Sensitivity: 0.02 to 1.5 absorbance units
Electronic Response: 90% in 10 seconds
Light Source: Quartz iodine lamp
Filter Wavelengths: 1.0 to 2.8 microns
Sample Cell: Stainless steel with sapphire windows,
standard; others available;
length per application
Flow Rate: Typically 50-200 cc/min. (depending
upon application)
Ambient Temperature: 0° to 50° C (without available auxiliary
heating).
Electrical Requirements: 115 VAC, 60 Hz (standard)
Readout Device: Meter on control module
Analog Output Signal: 0-1 V (standard)
Options Designated by Model # Suffix
B1: Local Explosion Proof Control Unit
B2: Remote Explosion-proof Control Unit
I5, I20 or I50: Current Outputs
S1 or S2: One or Two Alarm Circuits
K5, K10 or K100: Millivolt Output Signals
E5 or E10: Voltage Outputs in lieu of 0 to 1 V output
D: Dual Range
A: Automatic Zero
O5, O20 or O50: Optically Isolated Current Outputs
(explosion-proof control unit only)