user manual

Teledyne API - T100 UV Fluorescence SO2 Analyzer Getting Started
77
3.4.4.2. CALIBRATION PROCEDURE FOR THE O
2
OPTION
If your analyzer is equipped with the optional O
2
sensor, this sensor should be calibrated
during installation of the instrument. Refer to Section 9.10.1 for instructions.
3.4.4.3. CALIBRA
TION PROCEDURE FOR THE CO
2
OPTION
If your analyzer is equipped with the optional CO
2
sensor, this sensor should be
calibrated during installation of the instrument. Refer to Section 9.10.2 for instructions.
Note Once
you have completed the above set-up procedures, please fill out
the Quality Questionnaire that was shipped with your unit and return it
to Teledyne API. This information is vital to our efforts in continuously
improving our service and our products. THANK YOU.
06807C DCN6650