user manual

Operating Instructions Teledyne API Model T360/T360M Operation Manual
164
4.15.4.4. SELECTING A HESSEN PROTOCOL TYPE
Currently there are two versions of Hessen Protocol in use. The original
implementation, referred to as TYPE 1, and a more recently released version,
TYPE 2 that has more flexibility when operating with instruments that can
measure more than one type of gas. For more specific information about the
difference between TYPE 1and TYPE 2 download the Manual Addendum for
Hessen Protocol from the Teledyne API web site: http://www.teledyne-
api.com/manuals/index.asp .
To select a Hessen Protocol Type press:
SETUP X.X SECONDARY SETUP MENU
COMM VARS DIAG ALRM EXIT
SETUP X.X PR IM ARY SETUP MENU
CFG DAS RN GE PASS CLK MORE EXIT
SAMPLE* RANGE = 500.000 PPM CO2 =X.XXX
< TST TST > CAL SETUP
SETUP X.
X
COMMUNICATIONS MENU
ID INET HESN COM1 COM2 EXIT
SETUP X. HESSEN VARIATION: TYPE 1
SET> EDIT EXIT
SETUP X.X HESSEN VARIATION: TYPE 1
TYE1 TYPE 2 ENTR EXIT
SETUP X.X HESSEN VARIATION: TYPE 2
PREV NEXT OFF ENTR EXIT
Press to change
pr otocol typ e.
ENT
R
accepts the new
settings
EXIT ignores the new
settings
NOTE
While Hessen Protocol Mode can be activated independently for COM1 and COM2, The TYPE
selection affects both Ports.
07272B DCN6552