User's Manual

M400E Ozone Analyzer Operator’s Manual Getting Started
Default
value is:
01-JAN-03
SETUP X.X DELTA TIME00:00
<SET SET> EDIT EXIT
EXIT returns
to the SETUP
Menu
SETUP X.X DURATION:15.0 MINUTES
<SET SET> EDIT EXIT
SETUP X.X CALIBRATE: OFF
<SET SET> EDIT EXIT
SETUP X.X CALIBRATE: OFF
ON ENTR EXIT
SETUP X.X CALIBRATE: ON
<SET SET> EDIT EXIT
Toggle ON/OFF
key then press
ENTER
SETUP X.X SEQ 1) ZERO, 1:00:00
PREV NEXT MODE SET EXIT
SETUP X.X PRIMARY SETUP MENU
CFG ACAL DAS RNGE PASS CLK MORE EXIT
SETUP X.X SEQ 1) DISABLED
PREV NEXT MODE EXIT
SETUP X.X MODE: DISABLED
NEXT ENTR EXIT
SETUP X.X MODE: ZERO
PREV ENTR EXIT
SETUP X.X TIMER ENABLE: ON
SET> EDIT EXIT
SETUP X.X STARTING DATE: 01
–
JAN
–
03
<SET SET> EDIT EXIT
Default
value is:
ON
SAMPLE RANGE = 500.0 PPB O3 =XXXX
< TST TST > CAL CALZ CALS SETUP
SETUP X.X STARTING TIME:00:00
<SET SET> EDIT EXIT
SETUP X.X DELTA DAYS: 1
<SET SET> EDIT EXIT
Default
value is:
00:00
(
Midni
g
ht
)
Default
value is:
1
Default
value is:
00:00
Default
value is:
15.0
THE MODEL 400E ANALYZER IS NOW READY FOR OPERATION.
NOTE
Once you have completed the above set-up procedures, please fill out the Quality Questionnaire that
was shipped with your unit and return it to T-API.
This information is vital to our efforts in continuously improving our service and our products.
THANK YOU
USER NOTES:
04315 Rev. C1 39