User's Manual

35
5.9.5 Security Setup
To make changes in the Security menu, you must correctly input the phone password.
The initial password is 1234.
Phone Lock: If “Enabled”, when the phone is powered on you will be prompted to enter the
phone’s password correctly to use the phone.
Keypad Lock: The keypad lock can be set to be enabled after 5 seconds, 30 seconds, 60
seconds, or 5 minutes. To unlock the keypad, press “*” then the Answer/Send key.
Even when locked, you may answer an incoming call.
Call History Lock: If enabled the phone will require the password to be entered each time
you access the phone’s Call History.
Phonebook Lock: If enabled, the phonebook cannot be viewed until the password is
entered.
Message Lock: If enabled, the phone will require the password to be entered to access
messages.
Change Password: Change the password using this option. The Old Password must be
entered before a new one is accepted. Enter the same new password twice and press the
left soft/menu key to confirm. The new password will then become effective. During this
course you may press the right soft key to discard the change at any time and return to
higher-level menu. You can create separate passwords for the phone lock, the call history
lock, the phonebook lock, and the message lock.
Restore Factory Settings: This function is used for restoring to the default factory settings.
5.9.6 Phone Info
Displays the information about the phone.
1. Base Phone Information.
2. Icon Glossary
3. Operating System
4. Warranty Code
5. Refurbish
6 SAFETY INFORMATION FOR
WIRELESS HANDHELD PHONES
READ THIS INFORMATION BEFORE USING YOUR