User's Manual

A custom track or message played live through the auxiliary port;
Or if you prefer, you can select no Music on Hold.
Choosing the Music on Hold source
1. Press the “ Menu ” softkey while in idle mode.
2. Using the directional pad, move the indicator to “ Music On Hold. ” Press the “ Select ” softkey.
3. Move the indicator to “ M.O.H. Source ” and press the “ Select ” softkey.
4. Make your choice on which source you will use and press the “ Select ” softkey.
Recording your custom Music on Hold
1. Plug a compatible device into the provided auxiliary cord and plug that cord into the headset port.
2. Press the “ Menu ” softkey while in idle mode.
2. Using the directional pad, move the indicator to “ Music On Hold .” Press the “ Select ” softkey.
3. Select the “ Record M.O.H. ” option. Play your message or music sele
ction on your device.
4. When you are finished recording, press the “ Save ” softkey.
Playing your Custom Music on Hold through the Auxiliary Port
1. Plug a compatible device into the provided auxiliary cord and plug that cord into the headset port.
2. Press the “ Menu ” softkey while in idle mode.
3. Using the directional pad, move the indicator to “ Music On Hold .” Press the “ Select ” softkey.
4. Move the indicator to “ M.O.H. Source ” and press the “ Select ” softkey.
5. Select “ Auxiliary In ” and press the “ Select ” softkey. As long as that device is plugged in and playing, it
will be heard by all held calls on the system.
Troubleshooting
Operation By Battery
If the power cord is not plugged into the unit, and the battery is available the unit will enter Battery Operation
Mode. The Battery Operation Mode is designed to allow users to continue use of the phones during a power
outage and is not intended for prolonged use.
No dial tone
• Check or repeat installation steps:
• Make sure the telephone line cords are connected to the phone and the wall jack. Make sure the line cords
are not damaged.
• Make sure the telephone handset cord is connected to the phone and to the headset. MAke sure the cord
is not damaged.
• Make sure the hook switch pops up when the handset is lifted.
• Check the SPEAKER button. Make sure the ind
icator is off.
• Disconnect the phone from the wall jack and connect another phone to the same jack. If there is no dial
tone in the second phone, the problem might be your wiring or local service.
24