User's Manual

Telephone Operation

Making Calls with the Handset

1.PresstheHANDSETbutton,thelinewillgoohook.

2. Wait for a dial tone then dial a phone number.

3. Press the End soft key when nished.

Making Calls with the Speakerphone

1.PresstheSPEAKERbutton,thelinewillgoohook.

2. Wait for a dial tone then dial a phone number.

3. Press the END soft key when nished.

NOTE: If the line goes o-hook, the call timer counts time until the line goes on hook.

Making a Call with the cordless Headset

1. Adjust the cordless headset to rest comfortably on top of your head and over your ear.

2. Move the microphone to approximately 2 to 3 inches from your mouth.

3.PresstheTalkon/ObuttonontheheadsetORtheheadsetbuttononthehandsetto

get a dial tone.

4.Whennished,presstheTalkon/ObuttonontheheadsetORtheEND soft key on the

handset to hang up.

Making Calls with a wired Headset

1. Connect the headset plug to the headset jack on the side of the Handset.

2. Adjust the headset to rest comfortably on top of your head and over your ear.

3. Move the microphone to approximately 2 to 3 inches from your mouth.

4. Press the HEADSET button and the phone automatically opens the line.

5. Wait for a dial tone, then dial a phone number using the handset dial pad.

6. Press End soft key on handset when nished.

CAUTION: For servicing or replacement, you can purchase a suitable headset through

service center or retailer shop.

NOTE: Headset performance may vary depending on the quality of the headset.

Pre-dialing

1. With the phone idle, manually enter the telephone number. The telephone number shows

in the display.

2. Press the Dial soft key, SPEAKER button, HANDSET or HEADSET button to open a line, and

the telephone number is automatically dialed.