User's Manual

4
To Set Up - Child Unit
1. Position the Child Unit within 4 to 6 feet of
your child. NEVER position the unit within a
child’s reach.
2. Insert the connector on the AC adapter into
the jack on the back of the unit, then plug
the adapter into an electrical outlet.
1. Press the adapter cord into the grooved channel on
the back of the unit, making certain to slide it under
the two holding clips.
2. Securely fasten a #8 “pan” head screw to the wall,
leaving the screw head protruding by at least 1/4
inch. For best results use a 3/4-inch long screw;
mount in a solid wood panel, or use a screw anchor.
3. Fit the round opening
on the wall mount slot
over the screw head,
then slide the unit
down until it is
seated firmly.
4. To test that unit is
securely mounted:
press on its top
and side edges.
For wall mounting (optional)
R
ES
E
T
#8 “pan” head screw
WARNING:
Do not place Child Unit in crib or attach
to crib or playpen.
WARNING:
Do not mount the Child Unit in a location where
the unit or the adaptor cord is within the child’s
reach.