5:02 NOBEL Reference Guide SETUP concealed cep aon oo hus feo Lot Sor UB Sem AED ew BID £08 wane fork Latina tn
© 18.0CT.2002 582 ND. B52 P.5 1. 2, MANGA Base Station setup Plug the power cable into the base station and then into the wall outlet if necessary, Power on the unit by pressing the ON/OFF button, Transmitter setup Slide down and lift off the battery cover with a hall pen or other tools. Insert the: now battery pack then shut the battery compartment with cover, Slide the Power On/Off switch to on. Set local Alarm On/Off switch 10 corresponding location.
© 18.0CT.202@ 15:03 NO.6B2 P.5 2. When the pressure is detected, a confirmation beep will sound. The Base unit will start monitoring the status of that unit automatically, 3. The “ALARM” LED of Transmitter will turn on every 12 seconds when the unit sends out command to Base unit. 4. The Base unit will tum off corresponding LED when a valid command Is received. Alerting 1. When the pressure of the monitor pad is released for 2 seconds. "ALARM" | LED and warning phone on Transmitter turn on. | 2.
18.0CT, McGee 15:83 NG, BEZ P.7 = Normal Charging 1. Logout the unit as above. 2. Puttee unit on charger. 3, ‘ALARM’ LED flash when battery is fully charged. Monitoring while charging 1. Disconnect the mentoring pad from Transmitter and re-connect If to the jack on charger, 2. Put the Transmitter to charger.