Operation Manual

Battery control lamp
[1] Battery control lamp
• Green light = battery charge exceeds 80%
• Green ashing = battery is being charged
• Yellow light = battery status 20% to below 80%
• Red light = battery charge falls below 20%
The display „Sun Power“ (ashing
in green [2]) serves to indicate the
solar loudspeaker’s charging of
by solar radiation.
USB Connection
• Your solar loudspeaker has been equipped
with USB port. It offers the opportunity of char-
ging your SOUND.MOBILE independent from
solar radiation by deploying appropriate adap-
tors (for accessories, please refer to page 13).
➡ Open the USB cover ap, and plug the USB
cable into the USB port.
➡ If necessary, connect the cable to the corre-
sponding adaptor (not included with the scope
of delivery, see accessories on p. 13).
[3] USB port
[4] USB cable
Description
➡ In daytime, please ensure to place SOUND.
MOBILE in a manner, which allows for full sun-
light absorption in order to guarantee full battery
charge.
➡ Please ensure to always keep the solar panel
clean. Clean it as required and do not use any
aggressive abrasives or similar but a soft cloth
only (no microber cloth).
• The solar loudspeaker’s to simultaneous con-
nection to several audio devices is infeasible.
➡ Please ensure the maximum distance bet-
ween solar loudspeaker and output device not
to exceed approx. 10 meters. Sound interferen-
ces might be caused by too far distances and/
or possible obstacles between output device
and solar speaker.
• Sounds are exclusively transferred by Blue-
tooth
®
. Consequentially, the solar loudspeaker
can only be used in combination with suchlike
devices. In case you wish to link additional
devices (e.g. laptop, PC, etc.), which are not
equipped with Bluetooth
®
, respective adapters
are available on the market (see p. 13).
Notes
1514
[1]
[2]
[3]
[4]
ITFRENDE