Operation Manual

English - 32 -
Using SatcoDX Feature
SatcoDX (optional): You can perform SatcoDX
operations using the Satelite Settings menu. In the
SatcoDXmenu,there are two options regardingto
the SatcoDx.
YoucandownloadoruploadSatcoDXdata.Inorder
to perform these functions a USB device must be
connected to the TV.
You can upload current services and related satellites
&transpondersinTV,toaUSBdevice.
Additionally you can download one of the SatcoDx
lesstoredinUSBdevice,totheTV.
Whenyouselectoneoftheseles,allservicesand
related satellites and transponders in the selected
lewillbestoredintheTV.Ifthereareanyinstalled
terrestrial, cable and/or analog services, they will be
kept and only satellite services will be removed.
Afterwards, check your antenna settings and make
changes if necessary. An error message stating “No
Signal” may be displayed if the antenna settings are
notconguredproperly.
Media Playback via USB Input
You can connect a 2.5” and 3.5” inch (hdd with external
power supply) external hard disk drives or USB memory
stick to your TV by using the USB inputs of the TV.
IMPORTANT! Back up your les before making
any connections to the TV. The Manufacturer will
notberesponsibleforanyledamageordataloss.
Certain types of USB devices (e.g. MP3 Players)
or USB hard disk drives/memory sticks may not be
compatible with this TV. The TV supports FAT32
and NTFS disk formatting.
While formatting a USB hard disk that has 1TB (Tera
Byte) or more le capacity, you can experience
problems with the formatting process.
Quickly plugging and unplugging USB devices, is a
very hazardous operation. This may cause physical
damage to the USB player and the USB device itself.
DonotpullouttheUSBmodulewhileplayingale.
You can use USB hubs with your TV’s USB inputs.
External power supplied USB hubs are recommended
in such a case.
It is recommended to use the TV’s USB input(s)
directly, if you are going to connect a USB hard disk.
Note: When viewing image les the media browser menu
can only display 1000 image les stored on the connected.
Media Browser Menu
You can play photo, music, and movie les stored
on a USB disk by connecting it to your TV. Connect
a USB disk to one of the USB inputs located on the
side of the TV. Pressing the MENU button while in the
Media Browser mode will access the Picture, Sound
and Settings menu options. Pressing the MENU button
again will exit from this screen. You can set your Media
Browser preferences by using the Settings menu.
Loop/Shufe Mode Operation
Start playback with and
activate
TVplaysnextleandloop
the list.
Start playback with
OK and
activate
Thesamelewillbe
played in a loop (repeat).
Start playback with
OK/
and activate
Thelewillbeplayedina
shufe.
.
Quick Menu
Quick Settings menu allows you to access some
options quickly. This menu includes Power Save
Mode, Picture Mode, Favourites, Sleep Timer,
FollowMe TV (optional) and Information booklet
(optional), CEC RC Passthrough options. Press
Q.MENU button on the remote control to view quick
menu. See the following chapters for the details of
the listed features.
E-Manual (optional)
You can nd instructions for your TV’s features in
the E-Manual.
To use E-Manual, press to the Info button while main
menu is displayed on the screen.
By using the navigation buttons select a desired
category. Every category includes a different topics.
Select a topic and press OK to read instructions.
To close the E-Manual screen press the Exit button.
Note: The contents of the E-Manual may vary according to the
model.