Operation Manual

Non contractual document subject to change in case of typographical errors (Mktg0609)

ENGLISH

- Press the "Right/Left" keys to set the minutes

Press the "Up" key to go back.

- Programmed automatic shutdown

This setting lets you activate or disable programmed shutdown for your TELEFUNKEN frame.

Select the "Shutdown" option onscreen using the "Up/Down" keys on the remote, then press the

"Right/Left" keys to choose:

. On

. Off

- Programmed automatic shutdown time

Select the "Automatic shutdown time" option onscreen using the "Up/Down" keys on the remote, then:

- Press the "Right/Left" keys to set the hour

- Press the "Down" key to select minutes

- Press the "Right/Left" keys to set the minutes

Press the "Up" key to go back.

- Frequency of automatic start-up and shutdown

Select the "Shutdown" option onscreen using the "Up/Down" keys on the remote, then press the

"Right/Left" keys to choose:

. Once

. Everyday

. Monday-Friday

. Weekend

- Rebooting your frame

If the frame is handled incorrectly, it may be useful to reset the frame to its default settings. To do so,

select the "Reset" option onscreen using the "Up/Down" keys on the remote, then press the "Enter"

key.

Note: After rebooting, the language selection screen will appear during the following start-up, just as it

did for its first use.

V. Connecting to a computer

It is possible to transfer files into the frame by connecting it to your personal computer. To do so,

connect your frame to the computer with a USB cable (mini-USB port on the frame, and standard

USB port for the computer), then turn on your frame: the frame's screen will show "PC connection..."

Return to normal operation after disconnecting

On your computer, the following dialog box will appear: