User's Manual
M60 FET
The M60 is a re-interpretation of the classic phantom-powered pencil mic,
featuring exceptional transient response and high SPL handling capabili-
ties. Paired with its impressive clarity and subtle tonality, the M60 excels at
capturing acoustic and percussive instruments both in the studio and on
the stage. The M60 is hand-assembled in America using premium compo-
nents and utilizes an ultra-clean, true class-A discrete circuit paired with
an American-made transformer. Its unique circuit topology captures a wide
frequency range, which means life-like capturing of most sources.
Quick Start Guide
1. Attach the included shock mount onto a microphone stand.
2. Push the microphone through both sets of elastics of the mount.
3. Plug the included SGMC-5R 3-pin XLR cable into the microphone then
into your microphone preamplier input.
4. Apply +48V phantom power from your microphone preamplier. Allow
the microphone 15 seconds to power up before use.
M60 System Congurations
Operating Conditions
Because the M60 is a phantom-powered microphone, a +48V source is necessary for operation. Phantom
power is provided through most mixers, consoles, and preampliers as a standard feature. Please note that
the microphone should be muted when engaging phantom power, as it can produce a loud pop as it turns on.
6 TELEFUNKEN Elektroakustik 7
SDC Series
System M60 M61 M62 Master Stereo Master
Stereo
Omni
Tri-Mono
Deluxe
Tri-Mono
TK60 Cardioid Capsule X X 2X 2X 3X
TK61 Omni Capsule X X 2X 3X 3X
TK62 Hyper Capsule X X 2X
M 761 Shock Mount X X X X 2X 2X 3X 3X
SGMC-5R XLR Cable X X X X 2X 2X 3X 3X
ZC61 Zipper Case X X X X
ZC62 Dual Zipper Case X X
ZC63 Tri Zipper Case X X
WS20 Windscreen X X X X 2X 2X 3X 3X