R LCD TV Bedienungsanleitung Instruction Manual MODE D‘EMPLOI L32H125A3
Contents Safety Precautions Safety Precautions................................................ 31 Preparation........................................................ 31 Intended Use..................................................... 31 Power source..................................................... 31 Positioning the TV.............................................. 31 Power cord and plug.......................................... 32 Moisture and Water...........................................
Power cord and plug Wall Mounting (optional) • The power cord plug should be easily accessible. In case of storms and lightning, when going on holiday, or when the TV is not used for a long period of time disconnect the power cord from the mains power socket. • To prevent injury, this TV must be securely attached to the wall in accordance with the installation instructions (if the option is available).
Environmental Information TV - Features This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps: You can use Power Save Mode setting, located in the Picture Settings menu.
To change volume: Increase the volume by pushing the button up. Decrease the volume by pushing the button down. Viewing the TV To change channel: Press the middle of the button, the channel information banner will appear on screen. Scroll through the stored channels by pushing the button up or down. To change source: Press the middle of the button twice, the source list will appear on screen. Scroll through the available sources by pushing the button up or down.
Viewing remote control 1. Standby 2. Numeric buttons 3. TV-AV / Channel List / DVB-T/C 4. Volume up/down SOURCE 5. Mute 6. Navigation buttons 7. Menu on/off 8. OK / Channel List / Hold (in TXT mode) 9. Return/Back/Index page (in TXT mode) 10. Internet Portal TV 11. Media Browser 12. My button 1 / Youtube link (*) 13. Coloured Buttons 14. Mono-Stereo Dual I-II / Audio-Subtitle Language . 15. Subtitle on-off / Subtitle (in Media Browser mode) 16. Fast Rewind (in Media Browser mode) 17.
Viewing the Connections Connector Type Cables Device Scart Connection (back) VGA Connection (back) PC/YPbPr Audio Connection (side) SIDE AV Side Audio/Video Connection Cable (Supplied) PC Audio Cable (Not supplied) HDMI Connection (side&back) SPDIFF Connection (back) Side AV Connection (side) AV Connection Cable (supplied) SIDE AV HEADPHONE Headphone Connection (side) USB Connection (side) CI Connection CAM module (side) NOTE: When connecting a device via the Side AV input, you must use the s
Using a Conditional Access Module IMPORTANT: Insert or remove the CI module only when the TV is SWITCHED OFF. In order to watch certain digital channels, a conditional access module (CAM) can be necessary. This module must be inserted in the CI slot of your TV. Standby Notifications If the TV does not receive any input signal (e.g. From an aerial or HDMI source) for 5 minutes, the TV will go into standby. When you next switch-on the TV, the following message will be displayed: 1.
Installing the Batteries to the Remote 1. Lift the cover on the back of the remote upward gently. 2. Install two AAA batteries. Make sure to match the + and - ends of the batteries in the battery compartment (observe the correct polarity. 3. Replace the cover. Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active. The LED can also blink when you switch on the TV from standby mode.
You can activate Store mode (optional) option by using “ ” or “ ” button. If Store Mode (optional) is selected, Store mode option will be available in other settings menu and your TV’s features will be illustrated on the top of the screen.A confirmation screen will be displayed after selecting the Store Mode (optional). Select YES to proceed. If Home Mode is selected, Store mode (optional) will not be available after the First Time Installation.
Satellite Installation If you select Normal, satellite configuration screen will be displayed. There are three types of antenna selection. You can select Antenna type as Direct, ” or “ ” Unicable or DiSEqC switch by using “ buttons. The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. Press MENU button to view main menu. Select Channel List item by using Left or Right button.
Media Browser Menu You can play photo, music, and movie files stored on a USB disk by connecting it to your TV and using the Media Browser screen. To do this, perform the following: Connect a USB disk to one of the USB inputs located on the side of the TV. You can connect two USB devices to your TV. If both USB devices include music, picture or video files, USB selection OSD will be displayed on the screen. The first USB device connected to the TV will be named as USB Drive1.
Menu Features and Functions Picture Menu Contents Mode For your viewing requirements, you can set the related mode option. Picture mode can be set to one of these options: Cinema,Game,Sports, Dynamic and Natural. Contrast Sets the lightness and darkness values of the screen. Brightness Sets the brightness value for the screen. Sharpness Sets the sharpness value for the objects displayed on the screen. Colour Sets the colour value, adjusting the colors.
Menu Features and Functions Sound Menu Contents Volume Adjusts volume level. Equalizer: In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Classic and User. Press the MENU button to return to the previous menu. Equalizer menu settings can be changed manually only when the Equalizer Mode is in User. Balance This setting is used for emphasizing left or right speaker balance. Headphone Sets headphone volume.
Menu Features and Functions Conditional Access Controls conditional access modules when available. Language Configures language settings. Settings Menu Contents Configures parental settings. Parental Default PIN code can change depending on the selected country. If you are asked to enter a PIN code for viewing a menu option, use one of the following codes: 4725, 0000 or 1234. Timers Sets timers for selected programmes. Sets date and time. Note: * The TV takes the time info via the broadcast.
Menu Features and Functions Other Settings: Displays other setting options of the TV set: Store Mode (optional) If you are displaying the TV in a store, you can activate this mode. While Store Mode is enabled, some items in the TV menu may not be available to be set. DLNA Renderer DLNA renderer feature allows you to share files stored on your smartphone. If you have a DLNA renderer compatible smartphone and software installed, you can share/play photos with your TV.
Electronic Programme Guide (EPG) Some, but not all channels send information about the current and next programmes. Press the “ ” button to view the EPG menu. Broadband ISP Connection Lan(Ethernet cable) Rear of TV Up/Down/Left/Right: Navigate EPG. OK: Displays programme options. INFO: Displays, in detail information on programme selected. GREEN: Switches to List Schedule EPG. YELLOW: Switches to Timeline Schedule EPG. BLUE: displays filtering options.
Step 3: Play Shared Files via Media Browser Select Media Browser by using Left or Right button from the main menu and press OK button. Media browser will be then displayed. DLNA support is available only with Media Browser folder mode. To enable folder mode, go to Settings tab in the main media browser screen and press OK. In the settings options, highlight View Style and change to Folder using Left or Right button. Please select desired media type and press OK.
Select a link or application using the Left and Right or Up or Down buttons and press OK to activate. Select Videos from this screen to list all the available video files from the selected network. To play other media types from this screen, you must go back to main Media Browser screen and select media type as desired and then perform the network selection again. Refer to Media Browser USB Playback section for further information on file playback.
HbbTv applications use keys on the remote control to interact with the user. When an HbbTv applications is launched, the control of some keys are owned by the application. For example, numeric channel selection may not work on a teletect application where the numbers indicate teletext pages.
Teletext “ ” Teletext / Mix: Activates video text mode when pressed once (if available in your broadcast). Press again to view analogue teletext page. Press again to place the teletext screen over the programme (mix). Pressing again will quit the teletext mode. “BACK” Index: Selects the teletext index page. “i” Reveal: Shows hidden information (e.g. solutions of games). “OK” Hold: Holds a text page when convenient. Press again to resume.
• If your TV fails to restart in 10 minutes, unplug power for 10 minutes and re-plug again. TV should open with new software safely. If you still can not get TV working, please kindly repeat unplug and plug sequence a few times more. If your set still can not operate, please call the service personnel to fix the problem for you. Caution: While led is blinking during reboot do not unplug your TV’s power. Doing this may cause your TV not to re-open again and can only be fixed by service personnel.
Information for Users on Disposal of Old Equipment and Batteries 26 1152x870 75Hz 27 1280x768 60Hz These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product or battery, please consider the collection systems or facilities for appropriate recycling.
Specifications Licence Notifications TV BROADCASTING Manufactured under license from Dolby Laboratories. PAL/SECAM B/G D/K K’ I/I’ L/L’ TRADEMARK ACKNOWLEDGMENT DIGITAL RECEPTION DVB-T MPEG2 DVB-T MPEG4 HD DVB-T MHEG-5 Engine (for UK only) DVB-C MPEG2 DVB-C MPEG4 HD and the double-D symbol are trademarks of Dolby Laboratories. “DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks of the Digital Living Network Alliance.
Supported File Formats for USB Media Browser Media Movie Extension Format Notes Video Audio dat, mpg, mpeg Mpeg1,2 MPEG1/2 Layer 1/2/3, AAC/ HEAAC, AC3/EAC3, LPCM/ ADPCM 1080P@ 30fps 50Mbit/ sec dat, mpg, mpeg MPEG2 ,H.264, VC1, AVS, MVC MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM H.264:1080Px2@25fps 1080P@ 50fps MVC: 1080P@ 24fps Other: 1080P@ 30fps” 50Mbit/sec .vob MPEG2 MPEG1/2 Layer 1/2/3, AC3, LPCM 1080P@ 30fps 50Mbit/ sec .
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information.
Appendix: Nero MediaHome Installation • Please do not change displayed serial. This software is compatible with Windows XP and Windows 7. To install Nero MediaHome, please proceed as follows: Note: To use DLNA function, this software should be installed to your PC. 1. Insert the Nero MediaHome installation disc in your optical disc drive. • The Nero MultiInstaller screen with a button to start the installation process will open automatically.
automatically. A progress bar informs you of the progress of the installation process. 7. Use Typical installation and click the Next button. 10. Installation finishes. • The Prerequisites screen is displayed. The Nero MediaHome installation wizard checks the availability of required third-party software on your PC. If applications are missing they are listed and must be installed before continuing installation. The Help us to Enhance Nero Software screen is displayed.
13. A shortcut called Nero MediaHome 4 is now placed on your desktop Congratulations! You successfully installed Nero MediaHome 4 on your PC. 14. Run Nero MediaHome by pressing shortcut icon. • Click ADD icon from LOCAL FOLDERS to add the folder you want to share with the network. Select the folder that you want to share and click START SERVER. 15. You can display all media types from the library. Click Refresh icon to refresh. Click STOP SERVER icon to stop server.
1 Telefunken® Markenlizenz: Telefunken Licenses GmbH Vertrieb: Vestel Germany GmbH, D-85748 Garching bei München 1 1 Telefunken® licensed by: Telefunken Licenses GmbH Imported by: Vestel Germany GmbH, D-85748 Garching/Munich Die Marke Telefunken ist eine eingetragene Marke der Telefunken Licenses GmbH.
