Quick Start Guide

6
- Transferring a call
You can transfer an external call to another
handset registered on the base.
During the call:
1. Press the button followed by the
number of the handset number (1 to 5) that
you wish to call.
2. Press to end the transfer or press
to switch between the two callers.
Answering a call
Upon receipt of an external call, the handset
rings. The screen displays and the
subscriber number or, if the number is stored in
the phonebook, the caller’s name.
1. When the handset rings, press .
Note: an incoming call has priority over other
events. Thus, any operations in progress such
as phone setting, menu navigation, are
immediately discontinued.
Adjusting the volume
During the conversation, press  or  to
adjust the volume of the earpiece or
loudspeaker.
Locking the keypad
Press and hold the button. The display
shows .
Unlocking the keypad
Within three seconds after pressing any button,
press .
With a locked keypad, it is always possible to
answer incoming calls.
PHONEBOOK
The handset's phonebook can hold up to 50
names and telephone numbers. The numbers
can have up to 20 digits, and names can have
up to 12 characters.
Adding a contact
1. Press . The display shows phone
book, press .
2. The display shows Add Entry. Press .
3. The display shows Name ?. Use the keypad
to enter the name and press .
4. The display shows Number ?. Use the
keypad to enter the phone number and
press .
5. The display shows Melody 1. Press ▲ or ▼
to select the ringtone you want.
Deleting a contact
1. Press . The display shows Phone
Book, press .