User guide

31
receive an incoming call the base and the handset will ring at
the same time. With ‘Ring priority’ you can set the handset to
ring 2, 4 or 6 times before the base will ring.
1. Press ‘Menu’, scroll ▼ to ‘Settings’ and press ‘Select’.
2. Scroll ▼ to ‘Set Base’. Press ‘Select’.
3. Scroll ▼ to ‘Ring priority’. Press ‘Select’.
4. Scroll ▼ to ‘Select Handset’. Press ‘Select’. The other
handsets registered to the base are displayed, e.g.
Handset 1. Press ▲ or ▼ to select the handset that you
would like to ring first and press ‘Select.
5. Press ▲ or ▼ to highlight to 2, 4 or 6 Rings and press
‘Select’.
6. Press ‘Back’ three times to return to standby.
Note: To change back to the original setting of the base and
handset ringing at the same time select ‘All Handsets’ at Step
4.
5. Setting the recall mode
The default recall time is suitable for your country and
network operator and is set at 100 ms (Recall 1).
1. Press ‘Menu’, scroll ▼ to ‘Settings’ and press ‘Select’.
2. Scroll ▼ to ‘Set Base’. Press ‘Select’.
3. Scroll ▼ to ‘Recall Mode’. Press ‘Select’.
4. Press ▲ or ▼ to highlight ‘Recall 1’ (100ms) or ‘Recall 2’
(250ms). Press ‘Select’ to confirm.
5. Press ‘Back’ three times to return to standby.