Operating instructions

49
Activation
Connection
Base
Plug the transparent connector of the power adapter into the place marked underneath
the base, and plug the other end into a wall outlet.
Handset
1. Insert the 2 AAA NiMH batteries supplied into the handset. Slide the battery
compartment cover back into place.
2. Place the handset in the base, and leave it to charge for at least 24 hours. Make sure
it is inserted in the right direction. When the handset is charged, the symbol is
displayed.
3. After 24 hours, plug the telephone cord into the base and into the telephone wall jack.
Set Date and Time

automatically set on all the handsets upon each call received.
If you do not subscribe to this service, you can set the date and time manually.
6. ▼ 
7. 
8. Enter the date in DD-MM format. Ex.: 04-08 for 4 August.
9. -hour, HH-MM format. Ex.: For example,
14-45 for 14:45 or 2:45pm.
10.  to return to standby mode.
Power outage
If the power goes out, you can only use the base to receive and make calls. The
telephone will ring when a call comes in, but the screen will not illuminate, and caller ID
will not be saved to the calls list. You will not be able to use the other features of the base
or the handset until power is restored.