Operation Manual

1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ”button to select
the “PIP” menu.
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press“CH /CH ” button to select
“PIP position” and press “VOL / ” button to adjust the
position of the sub-window.
3.Press the “MENU” button on the remote control to return
to upper menu
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH” button to Select
the “PIP” menu.
3.Press the “MENU” button on the remote control to return
to upper menu
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button button to
select “PIP Mode” and press “VOL / ” button to select
pip mode such as pip, pop, 9WIN and OFF.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ”button to select
the“PIP” menu
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button to select
“PIP Swap” and press “VOL / ” button to swap picture
between main window and sub-window.
3.Press the “MENU” button on the remote control to return
to upper menu
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “PIP” menu
‹
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button to select
“3D NR” and press “VOL / ” button to select 3D NR
function such as high, mid,low and off
3.Press the “MENU” button on the remote control to return
to upper menu
Exit
Exit
Exit
Exit
16
Move
Move
Move
Move