Operation Manual

1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “PIP” menu.
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button to select
“Window” and press “VOL / ” button to select the main
window and sub-window in the window.
3.Press the “MENU” button on the remote control to return
to upper menu.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “PIP” menu.
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button to select
“Main Source” and press “VOL / ” button to select the
signal input terminal of main window.
3.Press the “MENU” button on the remote control to return
to upper menu.
1.Press the “MENU” button on the remote control to enter
the OSD menu, the press “CH /CH ” button to select
the “PIP” menu.
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button to select
“ Size” and press “VOL / ” button to adjust the
size of the sub-window.
3.Press the “MENU” button on the remote control to return
to upper menu.
PIP
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “PIP” menu.
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button to select
“PIP Source” and press “VOL / ” button to select the
signal input terminal of main window.
3.Press the “MENU” button on the remote control to return
to upper menu.
Exit
Exit
Exit
Exit
15
Move
Move
Move
Move