Operation Manual

CONNECTION
Notes:
¾ Before connecting the AC cord, please check that the rated voltage shown on the rear panel matches your local
voltage.
¾ Connect the speakers, antennas, and all optional equipment first. Then connect the AC cord.
¾ Please look at the attached connection diagram for reference.
FM wire antenna connection
You can use the FM wire antenna or coaxial joint (75) antenna. For best reception, put the antenna as far away as
possible from the unit, connection wire and AC cord. Adjust the direction of antenna for best reception when receiving FM
station.
AM loop antenna connection
Open the AM antenna jack which lies at the back of the unit, then insert the antenna’s leads into the jack and lock it well.
Adjust the antenna’s direction for best reception.
Speaker connection
Connect the speakers to the unit or subwoofer by the speaker wires, ensuring that the red wire goes to the red jack, and
black wire to the black jack.
Connecting auxiliary equipment to the system
You can connect the audio left and right out terminals of auxiliary equipment to the AUX INPUT terminals at the rear of
the unit.
TV connection
Use the video connection wire to connect a TV to the unit. Considering the various options, there are AUDIO, VIDEO,
and S-VIDEO output jacks on the rear cabinet.
AC power cord connection
After all other connections have been made, connect the AC power cord of the system and subwoofer to the wall outlet.
AC POWER OPERATION
Before using the function of the remote control as well as the deck of the main unit, press the POWER button to activate
the main power of the system.
Put through power
Press the STANDBY button to turn on the unit from STANDBY mode and the VFD starts to display the information.
Shut off power
Press the STANDBY button again to turn off the system (this means the system is in STANDBY mode). If clock has been
set correctly, VFD will display the time.
WARNING:
If the system will be out of use for a long time, please use the POWER button on the back cabinet of the unit to shut off
the main power. Don’t turn the system on & off continuously, otherwise the system will be abnormal. For each turning on
and turning off, the time interval should beyond a minute.