Operation Manual

Automatic Selection
If you press the /TU+ button or the /TU- button for more than one second, the frequency will automatically be
adjusted up or down, until a station is found.
Preset Selection (This can only be used after the radio station has been set)
Press the NUMBER buttons to select the radio station that you want to preset. Then, VFD will display the band and the
frequency of the radio station that you have preset.
Preset radio station
1. You can preset 16 band stations for AM and another 16 band stations for FM.
2. Press the NUMBER buttons to choose the number firstly. The preset number will display on the screen.
3. Tune to the radio station that you wish to store.
4. Press the PROGRAM/MEM button and the word “MEM” will display on the VFD.
5. Press the PROGRAM/MEM button again and you can store the frequency of the radio station; on the VFD the word
“MEM” will disappear.
6. Repeat the above steps 1-4 so that you can store every radio station you want in the preset numbers.
FM reception mode
If the broadcast is in stereo, the word “STEREO” will display on VFD. If FM is not received clearly in stereo mode or there
is some noise, press the REP/ST button to select MONO mode. At that time, the reception will improve but it will not be in
stereo mode. If you want to return to stereo mode, press the REP/ST button and the word “STEREO” will display on VFD
again.
DVD OPERATION
Basic play
1. Press the FUN button on the unit or DVD button on the remote control to select DVD function.
2. Press the OPEN/CLOSE (on the remote control
) button to open the disc tray.
3. Place the disc on the disc tray.
4. Press the PLAY/ENTER button. Playback will then commence.
How to select the track
If you want to play the second track or chapter, press the number “2” button directly, then press PLAY/ENTER button to
play the second track or chapter.
How to pause playback (still playback)
1. Press the PAUSE button during playback.
2. Press the PLAY/ENTER button to resume normal playback.
How to remove the disc
1. Press the OPEN/CLOSE button.
2. Wait until the disc tray is completely open before removing any discs.
3. After removing the discs, press the OPEN/CLOSE button to close the disc tray.
4. For best care, return your disc to it’s original case.
How to stop playback
If the STOP button is pressed once, the DVD player is stopped. At this point, press the PLAY/PAUSE button to re-start
the disc from the same point.
If the STOP button is pressed twice, the disc will stop completely.