Operation Manual

Fast Forward / Rewind
Press the /TU+ or /TU- button once, the disc will be played forward or backward at double (2x) speed. With
each subsequent press, the disc will be played back at 4x, 8x, 16x, 32x speed. Press PLAY button again to return to
normal play.
Skip Next / Previous
Press the /CH+ or / CH- button to select the next track or the previous track.
Slow play
Press SLOW button when playing; with this function you can play the disc at 1/2, 1/4, 1/8, 1/16 of the normal speed. To
return to normal speed, press the PLAY button again.
Zoom picture
This DVD player allows you to zoom in/out of a picture as well as shift the zoom point. Press ZOOM during normal play
or slow motion, the DVD player magnifies in the center of the picture at 2x, 3x, 4x, 1/2, 1/3, 1/4 of the normal picture. In
the ZOOM mode, you can use
/ / / buttons to move the picture for optimum viewing.
Repeat play
You can use the REP/ST button to repeat normal playback.
¾ Press the REP/ST button the first time to repeat playing the present chapter.
¾ Press the REP/ST button again to repeat playing the present title.
¾ Press the REP/ST button a third time to repeat playing the whole disc.
¾ Press the REP/ST button a forth time to cancel repeating playing and return to normal playing.
Note:
With different discs, the REPEAT function may vary.
Repeat a specific section
You can repeat a certain section by using the A-B RPT button on the remote control. Firstly press the A-B RPT button at
the beginning of the section you want, and press it again at the end of the section. The unit will repeat playback from A to
B. If you want to cancel the repeat section, press the A-B RPT button once again.
Note:
Some discs will not respond to the A-B REPEAT function.
Display
During playback, you can press the DISPLAY button on the remote control to show the various information available.
For DVD discs, the DISPLAY function button will allow you to view the following:
TITLE ELAPSED / TITLE REMAIN / CHAPTER ELAPSED / CHAPTER REMAIN / DISPLAY OFF
For VCD/CD discs, the DISPLAY function button will allow you to view the following:
SINGLE ELAPSED / SINGLE REMAIN / TOTAL ELAPSED / TOTAL REMAIN / DISPLAY OFF
GOTO function
If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number.
1. Press GOTO button during playback.
2. Press PLAY/ENTER button, make sure that the space next to TITLE is highlighted.
3. Press NUMBER button to select the title and chapter you want.
4. The disc will automatically play from the point you have selected.
NOTE:
¾ By pressing
/ / / you can shift the highlight between the TITLE and CHAPTERS.
¾ In order to access the GOTO function on some discs, you must first press the PBC OFF.
¾ To cancel GOTO function, press the GOTO button again.