Operation Manual

-26-
Operation Instructions
STEP 4
FINE TUNING
To tune in to weak stations manual tuning must be used.
1. Select the program number you want to fine-tune with the PROG +/- buttons or direct select buttons.
2. According to above mentioned steps, open the TUNING menu.
3. Select "FINE TUNE" with PROG+/- button.
4. Press VOL. +/- buttons until the best possible picture and sound are obtained, while "FINE TUNE" flickers.
5. Move to program number item with PROG+/- buttons.
6. Enter new program number with direct select buttons. Store the program with VOL.+/-buttons .
7. Press the MENU key twice to go back to the normal TV mode.
TO SELECT BAND
1.According to above mentioned steps, open the TUNING menu.
2.Select " BAND" submenu with PROG.+/-buttons .
3. Press VOL. +/- buttons , you can select VHF-L, VHF-H and UHF band.
NOTE:
There is no manual TINT control when selected COMPONENT VIDEO IN mode.
STEP 3
MANUAL TUNING
1.According to above mentioned steps, open the TUNING menu.
2.Move to "MANUAL TUNING"with PROG+/- buttons.
3.Press VOL.+/-buttons , the search is being carried out. When a TV station signal is received , the character stops flicker and the current
item moves to program number item.
4. Enter new program number with direct select buttons. Press VOL.+/-to store the program , then the current menu item jumps to
"MANUAL TUNING" automatically .
5.Then press VOL. +/- button to continue search.
6. Press the MENU key twice to go back to the normal TV mode.
TUNING
POSITION 3
AUTO TUNING
MANUAL TUNING
SKIP ON
BAND VHF-L
FINE TUNING
Press PROG..+/-
Buttons
Press PROG.+/-
Buttons
Press direct select
Buttons
Press MENU key twice
Press VOL.+/-
Buttons
Press VOL.+/-
Buttons
Begin auto tuning
TUNING
POSITION 3
AUTO TUNING
MANUAL TUNING
SKIP ON
BAND VHF-L
FINE TUNING
TUNING
POSITION 12
AUTO TUNING
MANUAL TUNING
SKIP ON
BAND VHF-L
FINE TUNING
3


3


12


12
Press MENU
Buttons
Press VOL.+/-
Buttons