User's Manual

ETRX358x-LRS and ETRX358x-LRS

2.3 European Certification

The ETRX358x and ETRX358xHR families are at a maximum power level of 21.15mW e.i.r.p.

(13.2dBm) compliant to the following standards:

• Radio: EN 300 328:V1.8.1

• EMC: EN 301 489-17:V2.2.1

• Safety: EN 60950-1:2006/A12:2011

All tests have been conducted with the antennae listed in Table 2.

If the ETRX358x-LRS and ETRX358xHR-LRS families of modules are incorporated into an OEM

product, the OEM product manufacturer must ensure compliance of the final product to the

European Harmonised EMC, and low voltage/safety standards. A Declaration of Conformity must

be issued for each of these standards and kept on file as described in the R&TTE Directive. The

final product must not exceed the specified power ratings, antenna specifications and installation

requirements as specified in this user manual. If any of these specifications are exceeded in the

final product then a submission must be made to a notified body for compliance testing to all of the

required standards.

The ‘CE’ marking must be applied to a visible location on any OEM product. For more information

please refer to http://ec.europa.eu/enterprise/faq/ce-mark.htm. Customers assume full

responsibility for learning and meeting the required guidelines for each country in their distribution

market.

2.4 Declarations of Conformity

Telegesis (UK) Ltd has issued Declarations of Conformity for all ETRX3 series ZigBee RF

Modules, which cover Radio Emissions, EMC and Safety. These documents will be available from

our website or on request

2.5 IEEE 802.15.4

IEEE 802.15.4 is a standard for low data rate, wireless networks (raw bit-rate within a radio packet

of 250kbps @2.4GHz) which focuses on low cost, low duty cycle, long primary battery life

applications as well as mains-powered applications. It is the basis for the open ZigBee Protocol.