User's Manual

Emberpulse™ pulsing speed
Emberpulse™ uses pulsing light to provide a simple visual reference
about your home’s energy use. Your Emberpulse™ will indicate your
electricity consumption and generation by pulsing at different speeds.
A fast pulsing light indicates:
electricity is flowing quickly through your meter.
A slow pulsing light indicates:
electricity is flowing slowly through your meter.
Normally, your home is consuming energy from the grid. At these times,
a faster pulsing light indicates your home is consuming electricity at
a fast rate. A slower pulsing light indicates your home is consuming
relatively little electricity from the grid.
If you have a solar power system, you may, at times, be a net exporter
of energy to the grid. During these times, you will see a yellow light
alternating with green, orange or red. A faster pulsing light indicates
your home is exporting a relatively large amount of electricity to the
grid. A slower pulsing light means your home is exporting a relatively
small amount of electricity to the grid.
Operation
Manual connection to meter
• To set up the connection from Emberpulse™ to your meter, you will
need the following information:
 The “MAC” number, located on the sticker on the rear of Emberpulse™
 The “Code” number, located on the sticker on the rear of Emberpulse™
 A recent electricity bill
• Go to emberpulse.com/meter-connect for detailed instructions,
specific to your electricity supplier.
11