User's Manual

Emberpulse™ system color indicators
The Emberpulse’s system color indicators are magenta, blue, white and
yellow. Below are the meanings behind each indicator.
System color indicators
Color Pulse behavior Meaning
Constant
steady light
The device has just been powered on
or it has no Internet connection. Expect
a change after 60-90 seconds of
power up when the device has finished
booting. If no change after this time,
check your Internet connection.
Flashing
quickly
The device has a network connection but
cannot contact the Emberpulse™ web server.
Slowly
alternating
Your Emberpulse™ needs to be
replaced. Please contact Embertec®
customer support.
Flashing
quickly
Only applicable if your Emberpulse™ is
connected to a compatible Emberplug®/
strip. Your Emberplug®/strip is about
to turn off. If you want it to remain on,
press a volume button on your nearby
audio-visual remote control.
Alternating
with one of the
customizable
color indicators
Your home is currently exporting solar
generated energy to the grid. Yellow will
always be seen alternating with either
green, orange or red. For the meaning
of the green, orange or red lights, refer
to the subsequent customizable color
indicator section.
No color
activity
None If there has been no color activity for
some time, this indicates the Emberpulse™
has gone to sleep; OR has lost power.
To wake the Emberpulse™, wave your
hand over the top of Emberpulse™ unit,
within 0.5 inches of the surface.
Magenta
White
Yellow
Magenta
alternating
with Blue
13