Quick Start Guide

II
Setting the receiving mode.
Restricting receiving.
1 Press the Empfangsmodus (Receiving mode) key until
the required mode is displayed on the right-hand side in
the display :
AUTO = Automatic receiving
MANU = Manual receiving
1 Press the Menü (Menu) key.
2 Press the up/down arrow key until [ENTRY MODE] is
displayed.
3 Press the right arrow key.
4 Press the up/down arrow key until [ANTI JUNK #] is
displayed.
5 Press the right arrow key.
6 Press the up/down arrow key until [INVAL. FAX-ID] is
displayed.
7 Press the right arrow key.
8 Enter one of the following options using the dialling
keypad :
1 = BLOCK RECEP., faxes with faulty call identification line
are received.
2 = CAN RECEIVE, faxes with faulty call identification line
are rejected.
The function is applied.
9 If you do not wish to make any further settings, press the
Stop key.
KBA Fax500_GB.fm Seite II Montag, 2. April 2007 3:50 15