User's Manual

DTR4000CA Menu Operation
 When you are asked to enter PIN Code, you enter current PIN Code. Then you
will be asked for new PIN Code. You enter new PIN code, and the system re-
asks you to repeat the PIN Code. If you enter the new PIN Code again, then the
PIN code is permanently changed.
** Be sure not to forget the PIN code. If you forget the PIN Code, you have to
contact the distributor to clear up the problem
Receiver Update
 At the moment, the DTR4000CA can be upgraded via RS-232C cable from the
PC. The upgrade software can be downloaded from the manufacturer’s web
site. “Http://WWW.Telemann.com".
 Upgrade through Satellite will be added later.
Auto Installation
Based on the Satellite and Transponder information attached at the end of this
manual, DTR4000CA automatically sets all channels from a Satellite. This
information may change from time to time. When you cannot receive any signal
from any satellite or transponder, check the information of those satellite or
transponder.
 Select the Auto Installation from the MAIN menu.