User's Manual

DTR4000CA Trouble Shooting
Message or Display Possible Causes Remedies
Warning !. You will lose
current IRD settings. If you
want to continue, press OK
again.
Displayed when you run
“Factory Default Menu”
under Installation/System
settings. All information in
IRD will be reset to Factory
Default information. Any
new information will be
erased and cannot be
restored.
Wrong Password !
Wrong Password was entered
In Parental Lock, Installation
Menu, and Channel of
Parental Lock
Enter correct Password.
Front Panel Display Message
Message or Display Possible Causes Remedies
------
IRD is at standby Press Standby key on Front
Panel or Remote control and
activate the IRD.
0000
Displayed when IRD does
not work within three
seconds after transition to
Active Mode.
Refer to Service Center
BERR
Displayed when error
occurred at the conversion
from Bootloader to Main
Program.
Refer to the service center.
C . . .
At the change from Standby
mode to Active Mode,
displayed untill Bootloader
activates.
Message or Display Possible Causes Remedies