User Manual

DTR5000N Hardware Description
broadcast service and telnet monitor.
6 VIDEO output terminal
Connect this terminal to video input terminal of TV or VCR.
7 AUDIO L/R output terminals
Connect these terminals to audio L/R input terminals of TV, VCR, or Hi-Fi
audio system.
8 S-VIDEO output terminal
This terminal is connected to S-VIDEO input terminal of TV or VCR to output
S-VIDEO signal.
9 VCR SCART connector
Connect this connector to that of VCR via a SCART cable.
10 TV SCART connector
Connect this connector to that of TV via a SCART cable.
10 VCR SCART connector
Connect this connector to that of VCR via a SCART cable.
11 0/12V OUT
Connect this terminal to an external 0/12Volt switch box.
12 TV OUT
Connect this terminal to the input of TV or VCR via a coaxial cable.
13 ANT IN
Connect this terminal to a terrestrial UHF antenna via coaxial cable.
14 POWER INPUT
Connect the power cord of AC85V to 265V, 50/60Hz
15 GROUND
How to Connect Your DTR5000N to Various Systems
As shown in the figure below, you can connect your DTR5000N to a TV set, a VCR
and a Hi Fi system. Consult your local supplier for assistance in setting-up your
system best suited to your requirements.
CAUTION !
Please DO NOT plug in the main power supply cord until you have
finished all other connection!