Datasheet

Product datasheet
Characteristics
XC1AC127
limit switch XC1AC - reinforced roller lever -
1NC+1NO - break before make
Main
Range of product OsiSense XC
Series name Special format
Product or component type Limit switch
Product specific application Materials handling
Device short name XC1AC
Sensor design -
Body type Fixed
Head type Plunger head
Material Metal
Fixing mode By the body
Movement of operating head Linear
Type of operator Spring return roller lever metal reinforced
Switch actuation By 30° cam
Type of approach Lateral approach, 2 directions
Electrical connection Screw-clamp terminals, clamping capacity: 1 x 0.5...1 x 2.5 mm²
Cable entry 3 entries tapped for Pg 13.5 cable gland, cable outer diameter: 9…12mm
Number of poles 2
Contacts type and composition 1 NC + 1 NO
Contact operation Slow-break, break before make
Number of steps 1
Positive opening Without
Minimum force for tripping 29N
Complementary
Contacts insulation form Zb
Maximum actuation speed 1m/s from left
0.5m/s from right
[Ithe] conventional enclosed thermal
current
10A
[Ui] rated insulation voltage 500V AC conforming to IEC 60947-5-1
500V AC conforming to NF C 20-040
600V DC conforming to IEC 60947-5-1
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Jan 20, 2020
1