Datasheet

ManualsBrandsTelemecanique Sensors ManualsInductive SensorsInductive Sensor 8mm PNP, Make Contact (NO)

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

May 7, 2018

Product data sheet

Characteristics

XS118BLPAM12

inductive sensor XS1 M18 - L64mm - brass -

Sn5mm - 12..24VDC - M12

Main

Range of product OsiSense XS

Series name General purpose

Sensor type Inductive proximity sensor

Sensor name XS1

Sensor design Cylindrical M18

Size 64 mm

Body type Fixed

Enclosure material Nickel plated brass

Type of output signal Discrete

Wiring technique 3-wire

[Sn] nominal sensing distance 5 mm

Discrete output function 1 NO

Discrete output type PNP

Electrical connection 4 pins M12 male connector

[Us] rated supply voltage 12...24 V DC with reverse polarity protection

Switching capacity in mA <= 200 mA with overload and short-circuit protection

IP degree of protection IP67 conforming to IEC 60529

Complementary

ISO thread M18 x 1

Detection face Frontal

Detector flush mounting acceptance Flush mountable

Material Metal

Front material PBT

Sensing range > 4...8 mm

Operating zone 0...4 mm

Differential travel 1...15% of Sr

Summary of content (6 pages)

PAGE 1
XS118BLPAM12 Product data sheet Characteristics Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications inductive sensor XS1 M18 - L64mm - brass Sn5mm - 12..
PAGE 2
Output circuit type DC Status LED 1 LED yellow for output state Supply voltage limits 10...36 V DC Switching frequency <= 1200 Hz Voltage drop <= 2 V at closed state Current consumption <= 10 mA at no-load Delay first up <= 15 ms Delay response <= 0.1 ms Delay recovery <= 0.3 ms Marking CE Threaded length 43 mm Height 18 mm Length 64 mm Product weight 0.035 kg Environment Product certifications CSA UL Ambient air temperature for operation -25...
PAGE 3
Product data sheet Dimensions Drawings XS118BLPAM12 Dimensions (1) LED 3
PAGE 4
Product data sheet Mounting and Clearance Minimum Mounting Distances Side by side e (1) ≥ 10 mm/0.39 in. Face to face e (2) ≥ 60 mm/2.36 in. Facing a metal object e (3) ≥ 4 15 mm/0.
PAGE 5
Product data sheet Connections and Schema XS118BLPAM12 Wiring Schemes M12 connector PNP 1: 2: 3: 4: (+) Not connected (-) NO Output 5
PAGE 6
Product data sheet Performance Curves XS118BLPAM12 Performance Curves Standard Steel Target : 18x18x1 mm (1) (2) (y) Pick-up points Drop-out points (object approaching from the side) Sensing distance in mm 6