Datasheet

Product datasheet
Characteristics
XS218BLPAL2
inductive sensor XS2 M18 - L53mm - brass - Sn8mm
- 12..24VDC - cable 2m
Main
Range of product
OsiSense XS
Series name
General purpose
Sensor type
Inductive proximity sensor
Sensor name
XS2
Sensor design
Cylindrical M18
Size
53 mm
Body type
Fixed
Enclosure material
Nickel plated brass
Type of output signal
Discrete
Wiring technique
3-wire
[Sn] nominal sensing distance
8 mm
Discrete output function
1 NO
Discrete output type
PNP
Electrical connection
Cable
Cable length
2 m
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Switching capacity in mA
<= 200 mA with overload and short-circuit
protection
IP degree of protection
IP67 conforming to IEC 60529
Complementary
ISO thread
M18 x 1
Detection face
Frontal
Detector flush mounting acceptance
Non flush mountable
Material
Metal
Front material
PBT
Operating zone
0...6.4 mm
Differential travel
1...15% of Sr
Output circuit type
DC
Cable composition
3 x 0.14 mm²
Wire insulation material
PVC
Status LED
1 LED yellow for output state
Supply voltage limits
10...36 V DC
Switching frequency
<= 500 Hz
Voltage drop
<= 2 V at closed state
Current consumption
<= 10 mA at no-load
Delay first up
<= 15 ms
Delay response
<= 0.1 ms
Delay recovery
<= 1 ms
Marking
CE
Threaded length
33 mm
Height
18 mm
Length
53 mm
Product weight
0.105 kg
Environment
product certifications
CSA
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
1 / 3